LiNbO3 Lithium Niobate Crystal |
| Lithium Niobate (LiNbO3) is widely used as electro-optic modulator and Q-switch for Nd:YAG, Nd:YLF and Ti:Sapphire lasers as well as modulator for fiber optics, etc. The transverse modulation is mostly employed for LiNbO3 crystal. Also LiNbO3 Crystal is widely used as frequency doublers for wavelength >1um and optical parametric oscillators (OPO) pumped at 1064 nm as well as quasi-phase-matched (QPM) devices.
|
Main Features |
· Large Electro-Optic (E-O) coefficients · Large Acousto-Optic (A-O) coefficients |
Typical Applications |
· Frequency doublers · Optical parametric oscillators (OPO) · Quasi-phase-matched (QPM) device · Q-switches and modulator |
Specifications |
| Dimensional Tolerance±0.1mmAngle Tolerance±0.5degWavefront Distortion<λ/4 at 633nmSurface Flatness<λ/8 at 633 nmSurface Quality20/10 Scratch and DigParallelism<20 arc secondsPerpendicularity<5 arc minuntesClear Aperture>Central 90%AR-Coatingdual waveband AR coating at 1064/532 nm on both surfaces, with R < 0.2% at 1064 nm and R < 0.5% at 0.532 nm per surface
|
LiNbO3 Lithium Niobate Crystal |
| Lithium Niobate (LiNbO3) is widely used as electro-optic modulator and Q-switch for Nd:YAG, Nd:YLF and Ti:Sapphire lasers as well as modulator for fiber optics, etc. The transverse modulation is mostly employed for LiNbO3 crystal. Also LiNbO3 Crystal is widely used as frequency doublers for wavelength >1um and optical parametric oscillators (OPO) pumped at 1064 nm as well as quasi-phase-matched (QPM) devices.
|
Main Features |
· Large Electro-Optic (E-O) coefficients · Large Acousto-Optic (A-O) coefficients |
Typical Applications |
· Frequency doublers · Optical parametric oscillators (OPO) · Quasi-phase-matched (QPM) device · Q-switches and modulator |
Specifications |
| Dimensional Tolerance±0.1mmAngle Tolerance±0.5degWavefront Distortion<λ/4 at 633nmSurface Flatness<λ/8 at 633 nmSurface Quality20/10 Scratch and DigParallelism<20 arc secondsPerpendicularity<5 arc minuntesClear Aperture>Central 90%AR-Coatingdual waveband AR coating at 1064/532 nm on both surfaces, with R < 0.2% at 1064 nm and R < 0.5% at 0.532 nm per surface
|
